28 MAINTENANCE
10 Turn the product body over, lift the
Kompressor lever
h up, and clean the inside
of the working plate with the towel-wrapped
brush handle.
Cleaning the Filters
Clean the pre-filter and exhaust filter regularly and
wash them in running water at least once a month
to maintain the optimum suction power of the
appliance.
• The frequency of cleaning depends on where
and how often you use the product. Clean the
filters more frequently if the appliance is used
regularly or in areas with a lot of dust.
• Filters are consumables. Please purchase more
filters from an authorized service center.
1 Remove the battery from the product body.
2 Rotate the exhaust filter a to the unlocked
position b to separate it from the product
body.
3 Grip the exhaust filter cover c and the
exhaust filter a using both hands and rotate
the exhaust filter cover while pressing the
PUSH button in order to separate it from the
exhaust filter.
4 Lift out the pre-filterd from the product body.
5 Use the combination tool e to clean any dust
off the motor.
• Do not wash the motor with water.
6 Clean the exhuast filter by brushing the dust
off it regularly and wash it in running water at
least once a month.
• To avoid odor and the malfunction of the
motor, allow the exhaust filter to dry
completely in a well-ventilated area out of
direct sunlight for at least 24 hours before
reassembling.
To Next Page
Loading...
Need help?
General
