31MAINTENANCE
ENGLISH
5 Slide the brush back into the nozzle until it
clicks into place.
Cleaning the Pet Nozzle
1 Press the nozzle release button a to remove
the nozzle from the extension pipe or product
body.
2 Hold down the PUSH button on the nozzle
while removing the rotating brush.
3 Attach the crevice tool to the product body
and use the vacuum to remove foreign
objects and dust from the brush and the
bottom of the nozzle.
4 Use a damp towel or cloth to remove any
remaining foreign objects and dust from the
brush and the bottom of the nozzle. Remove
foreign objects, debris and hair from all
nozzle rollers using tweezers.
5 Insert the left side of the brush b into the
groove c inside the nozzle.
6 Press the brush cover until it clicks to lock the
brush in place.
Cleaning the Bedding Nozzle
1 Press the nozzle release button to remove the
nozzle from the extension pipe or product
body and turn the nozzle upside down.
2 Attach the crevice tool to the product body
and use the vacuum to remove foreign
objects and dust from the bottom of the
nozzle.
• Use a damp towel or cloth to remove any
remaining foreign objects and dust from
the bottom of the nozzle. After cleaning,
wipe the nozzle dry.
• Do not rinse or submerge the nozzle in
water.
Cleaning the Mop Nozzle
1 Press the nozzle release button to remove the
mop nozzle from the extension pipe, and turn
the nozzle upside down.
2 Use a damp towel or cloth to remove any
remaining foreign objects and dust from the
bottom of the mop nozzle. Remove foreign
objects, debris and hair from all nozzle rollers
using tweezers.
To Next Page
Loading...
Need help?
General
