30 MAINTENANCE
3 Pull the brush cover forward and pull the
brush out.
4 Attach the crevice tool to the product body
and use the vacuum to remove foreign
objects and dust from the brush and the
bottom of the nozzle.
5 Use a damp towel or cloth to remove any
remaining foreign objects and dust from the
brush and the bottom of the nozzle.
• Carefully use a tweezers to remove foreign
objects from the nozzle rollers.
• Do not rinse or submerge the rotating
brush or nozzle in water.
• Wrap the handle of the cleaning brush with
a wet towel or cloth and use it to clean the
rotating brush and nozzle.
6 Slide the brush back into the nozzle and
rotate the cover back into place. Turn the
cover lock clockwise to lock the cover.
Cleaning the Slim Hard Floor Nozzle
1 Press the nozzle release button a to remove
the nozzle from the extension pipe or product
body.
2 Turn the nozzle upside down and remove the
rotating brush while holding down the PUSH
button on the nozzle.
3 Attach the crevice tool to the product body
and use the vacuum to remove foreign
objects and dust from the brush and the
bottom of the nozzle.
4 Use a damp towel or cloth to remove any
remaining foreign objects and dust from the
brush and the bottom of the nozzle.
• Remove foreign objects from the rollers of
the nozzle using tweezers.
• Do not rinse or submerge the rotating
brush or nozzle in water.
• Wrap the handle of the cleaning brush with
a wet towel or cloth and use it to clean the
rotating brush and nozzle.
To Next Page
Loading...
Need help?
General
