EasyManua.ls Logo

LG AH-W096A0 - Operation Safety

LG AH-W096A0
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 4 -
Copyright ©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
Safety Precautions
Operation
Do not modify or extend the
power cable.
• There is risk of fire or electric
shock.
Do not install, remove, or rein-
stall the unit by yourself (cus-
tomer).
• There is risk of fire, electric
shock, explosion, or injury
Be cautious when unpacking and
installing the product.
Sharp edges could cause injury.
Especially careful on the product
edges and the fins on the heat
exchanger.
For installation, always contact
the dealer or an Authorized
Service Center.
• There is risk of fire, electric
shock, explosion, or injury.
Do not install the product on a
defective installation stand.
• It may cause injury, accident, or
damage to the product.
Be sure the installation area
does not deteriorate with age.
If the base collapses, the product
could fall with it, causing property
damage, product failure, and per-
sonal injury.
Do not let the product run for a long
time when the humidity is very high
and a door or a window is left open.
• Moisture may be condensed
and wet or damage furniture.
Take care to ensure that power
cable could not be pulled out or
damaged during operation.
• There is risk of fire or electric
shock.
Do not place anything on the
power cable.
• There is risk of fire or electric
shock.
Do not plug or unplug the power supply
plug during operation.
• There is risk of fire or electric
shock.
Do not touch (operate) the prod-
uct with wet hands.
• There is risk of fire or electric
shock.
Do not place a heater or other appli-
ances near the power cable.
• There is risk of fire or electric
shock.

Related product manuals