Need help?Do you have a question about the LG ARND DCR4 Series and is the answer not in the manual?
Safety guidelines and warnings for unit installation procedures.
Electrical safety precautions and warnings related to wiring the system.
Safety guidelines and warnings for operating the unit correctly.
Description of the unit's internal parts and their functions.
Identification and description of the unit's electrical components.
Technical specifications for the Split Compact DOAS unit.
Electrical data and ratings for the DOAS unit models.
Physical dimensions for the ARND093DCR4 model.
Wiring diagrams for various DOAS unit models.
Diagrams and details of refrigerant flow for cooling, dehumidification, and heating.
Sound power level data for different operating conditions and models.
Procedure for receiving and inspecting the unit upon delivery.
Guidelines for handling, storing, and removing the unit.
Description of unit assemblies and airflow arrangement modes.
Guidelines for selecting an installation location and initial rough-in.
Dimensions for mounting and configuration of ductwork.
Required clearances for service and details for piping connections.
Guidance on installing a field-supplied outdoor air filter.
Safety guidelines for refrigerant and best practices for handling piping.
Procedures for brazing, supporting, and insulating refrigerant pipes.
Connections and information for condensate drains and pumps.
Connecting gravity drains and installing condensate drain pipes.
Guidelines for R410A piping installation and system design rules.
Sample piping layouts and conditions for pipe upsizing.
General electrical safety and rules for separating wiring types.
Best practices for power/communication wiring and terminal connections.
Specifications for power supply and wiring requirements.
Specifications for communication cables between units.
Step-by-step guide for connecting electrical wiring.
Diagrams and instructions for field wiring.
Overview and installation of field-mounted sensors.
Procedure for leak and pressure testing the refrigerant system.
How ambient conditions affect leak/pressure test results.
Procedure for evacuating the refrigerant system to remove moisture and air.
Worksheet for calculating and recording refrigerant charge.
Pre-startup checklist to ensure proper installation and configuration.
General safety precautions for the electric preheater accessory.
Safety guidelines specific to the accessory's installation.
Electrical safety precautions for wiring the accessory.
Safety guidelines for operating the electric preheater accessory.
General overview, structural components, and control box details.
General data, models, specifications, and temperature limits.
Physical dimensions for the electric preheater models.
Wiring diagrams illustrating interlock and internal wiring.
Step-by-step instructions for installing the electric preheater.
Configuration settings for preheater operation and control.
Description of the DOAS controller and its electrical specifications.
Instructions for accessing the controller via a web browser.
Setting service passwords and initial startup configurations.
Information on controller IP address and DOAS unit address settings.
Settings for connecting to central control systems (AC Smart/ACP).
Steps for setting up AC Smart and ACP controllers for communication.
Guidelines for configuring BMS connectivity (BACnet IP and MODBUS).
Details on terminal connections for main and CAREL control boards.
Layout and component details of the LG main control board.
Description and terminal connections of the UI module.
Description and terminal connections of the NTC module.
Description and terminal connections of the EEV module.
Guide to navigating controller menus and understanding status screens.
Procedure for updating the controller software via USB.
Comprehensive list of BACnet and Modbus objects for DOAS units.
Checklist items for rough-in, ductwork, refrigerant piping, and condensate systems.
Checklist items for insulation, electrical, control panel, and dampers.
To Next Page
General
