To Next PageTo Next Page
Need help?Do you have a question about the LG ARNU153TQC4 and is the answer not in the manual?
General| Energy Efficiency Ratio (EER) | 11.5 |
|---|---|
| Heating Seasonal Performance Factor (HSPF) | 9.5 |
| Refrigerant | R410A |
| Voltage | 208-230V |
| Noise Level (Outdoor) | 49 dB(A) |
| Cooling Capacity | 15000 BTU/h |
| Seasonal Energy Efficiency Ratio (SEER) | 19 |
| Operating Temperature (Heating) | 5-75 °F |
Overview of LG Multi V indoor units.
General safety precautions for installation personnel.
List of field-provided tools needed for installation.
List of field-provided parts needed for installation.
Explanation of model number coding for cassette units.
Information and warnings related to R410A refrigerant.
Technical specifications for 4-Way, 2-Way, and 1-Way cassette units.
Detailed physical dimensions for various cassette chassis types.
Electrical requirements and ratings for cassette indoor units.
Visual representation of refrigerant pipe connections for different models.
Critical warnings and precautions for safe installation and operation.
Electrical safety guidelines and warnings during wiring.
Safety warnings related to operating the indoor unit.
Criteria for choosing the optimal installation location for the unit.
Specifies minimum clearances around the installed unit.
Procedures for unpacking and inspecting the unit for damage.
Step-by-step guide for mounting the indoor unit chassis.
Guidelines for preparing and handling refrigerant pipes.
Instructions for connecting refrigerant pipes using flare or brazed methods.
Procedures for insulating refrigerant pipes to prevent moisture.
Wiring instructions for 4-way cassette indoor units.
Wiring instructions for 2-way cassette indoor units.
Wiring instructions for 1-way cassette indoor units.
Wiring for wall-mounted sensors and controllers.
Steps for installing the decoration panel on 4-way units.
Guidelines for installing the condensation drain pipe.
How to configure unit controls and DIP switches.
Setting up indoor units for group control and master/slave operation.
How to configure and use the remote control system.
Comprehensive checklist to verify correct installation procedures.
Contacts for assistance with freight, parts, and technical support.
