10
Multi V S Outdoor Unit
Installation of Outdoor Units
4. Lifting Method
• When carrying the suspended, unit pass the ropes between legs of base panel under the unit.
• Always lift the unit with ropes attached at four points so that impact is not applied to the unit.
• Attach the ropes to the unit at an angle of 40° or less.
• Use only accessories and parts which are of the designated specification when installing.
Be very careful while carrying the product.
• Do not have only one person carry product if it is more than 20 kg.
• PP bands are used to pack some products. Do not use them as a mean for transportation because they are
dangerous.
• Do not touch heat exchanger fins with your bare hands. Otherwise you may get a cut in your hands.
• Tear plastic packaging bag and scrap it so that children cannot play with it Otherwise plastic packaging bag may
suffocate children to death.
• When carrying in Outdoor unit, be sure to support it at four points. Carrying in and lifting with 3-point support may
make Outdoor unit unstable, resulting in a fall.
hGG
pG
j
o
hGGGGGGSGG
GGGGGGGGG
GGGU
[W¶GG
h
zG
~hyupun
H
To Next Page
Loading...
Need help?
General
