Why is the current low in my LG AS-C096QLA0?
A low current in your LG Air Conditioner can be due to a defective compressor or a defective 4-way reverse valve. Unfortunately, the provided information does not offer specific solutions for these causes.
Why high pressure does not quickly rise at the beginning of operation of LG Air Conditioner?
If you have an excessive amount of refrigerant in your LG Air Conditioner, high pressure does not quickly rise at the beginning of operation.
General| Refrigerant | R410A |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Type | Split |
| Cooling Capacity | 9000 BTU/h |
| Noise Level (Outdoor Unit) | 48 dB |
Explains the identification rules for model numbers, covering older and new systems.
Details the model numbering convention specific to European market models.
Highlights NEO-Plasma, Nano Bio Fusion, Plasma, and Nano Carbon filters for clean air.
Covers Healthy Dehumidification, Auto Clean, Sleep Mode, and Auto Restart functions.
Details optimized airflow with Chaos Swing, Jet Cool, and 4 Way Auto Swing.
Includes Ultra Silent operation, Gold Fin coating, ARTCOOL designs, and slim profile.
Explains economy, energy saving, and performance advantages of DC Inverter.
Lists detailed specifications for General Wall Mounted models (Group #1).
Lists detailed specifications for General Wall Mounted models (Group #2).
Lists detailed specifications for General Wall Mounted models (Group #3).
Lists detailed specifications for General Wall Mounted models (Group #4).
Provides dimensions for various General Wall Mounted indoor units by capacity and chassis.
Provides dimensions for various outdoor units by capacity and chassis.
Wiring diagrams for indoor units (5-24k Btu C/O & H/P, 30-36k Btu C/O & H/P).
Wiring diagrams for outdoor units (5-36k Btu, C/O & H/P).
Illustrates the refrigerant cycle for cooling-only models.
Illustrates the refrigerant cycle for cooling and heating models.
Cooling performance data for General Wall Mounted models across various conditions.
Heating performance data for General Wall Mounted models across various conditions.
Capacity change coefficients for cooling-only models based on pipe length.
Capacity change coefficients for heat pump models based on pipe length.
Defines operational limits for inlet air temperature during cooling.
Defines operational limits for inlet air temperature during heating.
Specifies voltage range and minimum starting voltage requirements.
Air velocity and temperature distributions for 7-18k Btu indoor units.
Functions of Wireless LCD remote controllers (Type 1 & 2).
Functions of Wireless Simple remote controllers (Type 3 & 4).
To Next Page
