LG AUUH186A - Wireless LCD Remote Control (Ceiling Cassette)

Function of Remote Control
Service Manual 17
2. Wireless LCD Remote Control(Ceiling Cassette models)
1 OPERATION DISPLAY
Displays the operation conditions.
2 ON/OFF BUTTON
Operation starts when this button is pressed and stops when
the button is pressed again.
3 JET COOL BUTTON
Used to select jet cool mode.
4 ON/OFF TIMER BUTTONS
Used to set the time of starting and stopping operation.
5 TIME SETTING BUTTONS
Used to adjust the time.
6 TIMER SET/CANCEL BUTTONS
Used to set the timer when the desired time is obtained and
to cancel the Timer operation.
7 AIR SWING BUTTON
Used to swing up and down.
8 SLEEP MODE BUTTON
Used to set Sleep Mode Auto operation.
9 AIR CIRCULATION BUTTON
Used to circulate the room air without cooling or heating
(turns indoor fan on/off).
10 ROOM TEMPERATURE CHECKING BUTTON
Used to check the room temperature.
11 RESET BUTTON
Used prior to resetting time or after replacing batteries.
12 INDOOR FAN SPEED SELECTOR
Used to select fan speed in four steps-low, medium, high,
or CHAOS.
13 ROOM TEMPERATURE SETTING BUTTONS
Used to select the room temperature.
14 ORERATION MODE SELECTION BUTTON
Used to select the operation mode.
15 PLASMA AIR CLEAN BUTTON(OPTIONAL)
ON OFF
SET CANCEL
PLASMA
Signal transmitter
(Transmits the signals to the signal receptor)
1
2
7
8
9
10
15
11
4
5
6
14
3
12
13
Heat Pump
Model
Cooling Model
Flip-up door
(opened)