LG AUUH186A - Wireless LCD Remote Control (Ceiling Concealed Duct)

18 Universal System Air Conditioner
Function of Remote Control
4. Wireless LCD Remote Control(Ceiling Concealed Duct models)
A/CL
1
4
3
5
6
11
10
9
2
7
8
Remote Controller
Signal transmitter
Transmits the signals to the signal receptor.
1 FAN Operation Button
Used to circulate room air without cooling or heating.
2 Cooling Operation Button
3 Soft Dry Operation Button
Used to dehumidify without overcooling.
4 Heating Operation Button
(Heat pump model only)
5 Timer Set Button
Used to set the timer when the desired time is obtained.
Then the wired remote controller is set up to 24 hours by an
hour but the wireless remote controller is set up to 7 hours
by an hour. Therefore, if you want to set over 7 hours, use
the wired remote controller.
6 Fan Speed Button
Used to set the desired fan speed.
7 On/Off Button
Operation starts when this button is pressed, and stops
when the button is pressed again.
8 Set Temperature Button
Used to set the temperature when the desired temperature
is obtained
9 Auto Operation Button
10 Plasma Air Clean Button(Optional)
11 Electric Heater Button
(Optional: 48/60k Model only)
Used to set the Electric Heater.