To Next PageTo Next PageWhy LG Air Conditioner does not cool or heat effectively?
If your LG Air Conditioner isn't cooling or heating effectively, several factors could be at play. First, check if the air filter is dirty and clean it according to the instructions. Second, ensure that the temperature is set correctly. Finally, make sure that the air inlet or outlet vents of the indoor unit are not obstructed.
What to do if my LG Air Conditioner does not operate?
If your LG Air Conditioner isn't operating, check the room temperature setting. Also, verify that the circuit breaker is on.
Why is my LG Air Conditioner so noisy?
The noise from your LG Air Conditioner could be due to a couple of reasons: If it sounds like water flowing, that's just the refrigerant moving inside the unit. If it sounds like compressed air releasing, that's the dehumidifying water being processed.
What to do if LG AVNQ21GJLA0 Air Conditioner remote controller display is faint?
If the remote controller display for your LG Air Conditioner is faint or completely blank, start by checking if the batteries are depleted. If not, ensure that the batteries are inserted correctly, matching the (+) and (-) directions.
What to do if my LG AVNQ21GJLA0 won't turn on for 3 minutes?
If your LG Air Conditioner doesn't operate for about 3 minutes after being turned on, this is normal. It's the protector of the mechanism. This delay protects the compressor from frequent on/off cycles.
What to do if condensation is leaking from my LG Air Conditioner?
If you notice condensation leaking from your LG Air Conditioner, check that the drain hose is tightly connected and that the indoor unit is installed evenly.
Why does my LG AVNQ21GJLA0 make crack sound?
The cracking sound you hear from your LG Air Conditioner is normal. It's caused by the expansion and constriction of parts like the front panel due to temperature changes.
Details the purpose and operation of each button on the remote control.
Step-by-step guide for operating the air conditioner in standard cooling mode.
How to adjust the desired temperature and check the current room temperature.
Procedures for setting current time, sleep timer, and on timer.
Detailed steps for cleaning and re-installing the air filters.
Situations requiring immediate professional service and contact.
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Refrigerant | R410A |
| Type | Split System |
| Cooling Capacity | 21000 BTU/h |
