To Next PageTo Next PageWhy LG Air Conditioner does not cool or heat effectively?
If your LG Air Conditioner isn't cooling or heating effectively, several factors could be at play. First, check if the air filter is dirty and clean it according to the instructions. Second, ensure that the temperature is set correctly. Finally, make sure that the air inlet or outlet vents of the indoor unit are not obstructed.
What to do if my LG AVNQ36GKLA0 Air Conditioner does not operate?
If your LG Air Conditioner isn't operating, check the room temperature setting. Also, verify that the circuit breaker is on.
Why is my LG AVNQ36GKLA0 Air Conditioner so noisy?
The noise from your LG Air Conditioner could be due to a couple of reasons: If it sounds like water flowing, that's just the refrigerant moving inside the unit. If it sounds like compressed air releasing, that's the dehumidifying water being processed.
What to do if LG AVNQ36GKLA0 remote controller display is faint?
If the remote controller display for your LG Air Conditioner is faint or completely blank, start by checking if the batteries are depleted. If not, ensure that the batteries are inserted correctly, matching the (+) and (-) directions.
What to do if my LG AVNQ36GKLA0 won't turn on for 3 minutes?
If your LG Air Conditioner doesn't operate for about 3 minutes after being turned on, this is normal. It's the protector of the mechanism. This delay protects the compressor from frequent on/off cycles.
What to do if condensation is leaking from my LG AVNQ36GKLA0?
If you notice condensation leaking from your LG Air Conditioner, check that the drain hose is tightly connected and that the indoor unit is installed evenly.
Why does my LG Air Conditioner make crack sound?
The cracking sound you hear from your LG Air Conditioner is normal. It's caused by the expansion and constriction of parts like the front panel due to temperature changes.
Essential safety guidelines related to electrical connections, wiring, and usage.
Guidelines for safe installation, unpacking, and unit placement.
Precautions for safe operation, handling, and environmental conditions.
Safety measures to prevent fire, explosion, water ingress, and storm damage.
Advice on unit handling, maintenance, environmental exposure, and airflow.
Detailed explanation of each button on the wireless remote controller.
Lists common issues, explanations, and corresponding page references for solutions.
Identifies critical situations requiring immediate professional service.
General| Color | White |
|---|---|
| Refrigerant | R32 |
| Cooling Capacity | 3.6 kW |
| Power Supply | 230 V, 50 Hz, 1 Phase |
| Operating Temperature (Cooling) | 18°C to 46°C |
