LG B2000 User Manual

B2000 User Guide
60
Internet [Menu 8 ]
- Bearer
You can set the bearer data service.
• Data
• GPRS
- Data settings
Appeares only if you select Data settings as a
Bearer\service.
IP address : Enter the IP address of the WAP
gateway you want.
Dial number : Enter the telephone number to dial to
access your WAP gateway.
User ID : The users identity for your dial-up server
(and NOT the WAP gateway).
Password : The password required by your dial-up
server (and NOT the WAP gateway) to
identify you.
Call type : Select the type of data call: Analogue or
Digital (ISDN).
Call speed : The speed of your data connection;
9600 or 14400.
Linger time : You need to enter timeout period.
After entering that, the WAP
navigation service will be unavailable
if any data is not input or transferred.
- GPRS settings
The service settings are only available when GPRS
is chosen as a bearer service.
IP address : Input the IP address of the WAP
gateway you access.
APN : Input the APN of the GPRS.
User ID : The users identify for your APN server.
Password : The password required by your APN
server.
- Connection type
The options for connection type are Continuous,
Temporary or HTTP and depend on the gateway
you are using.
Continuous
A confirmed delivery mechanism but generates
more network traffic.
Temporary
A non-confirmed (connectionless) service.

LG B2000 Specifications

General

Brand	LG
Model	B2000
Category	Cell Phone
Language	English