LG BP120 User Manual

Connecting18
Connecting
2
Connecting to an Amplifier via
HDMI Output
Connect the player’s HDMI OUT jack to the
corresponding in jack on your amplier using a
HDMI cable.
HDMI cable
HDMI cable
TV
Receiver/Amplier
Rear of the unit
Connect the amplier’s HDMI output jack to HDMI
input jack on your TV using a HDMI cable if your
amplier has HDMI output jack.
You will need to activate the player’s digital output.
(See “[AUDIO] Menu” on pages 23)
Connecting to an Amplifier via
Digital Audio Output
Connect the player’s DIGITAL AUDIO OUT jack
to the corresponding in jack (COAXIAL) on your
amplier using an optional digital audio cable.
Coaxial cable
Receiver/Amplier
Rear of the unit
You will need to activate the player’s digital output.
(See “[AUDIO] Menu” on pages 23.)

LG BP120 Specifications

General

Depth	278 mm
Width	401 mm
Height	88 mm
Weight	1300 g
Full HD	Yes
Device type	Blu-Ray player
HDMI version	1.4
Product color	Black
Audio decoders	Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS
AC input voltage	200 - 240 V
AC input frequency	50 - 60 Hz
Disc types supported	BD-R, BD-RE, BD-ROM, CD, CD-R, CD-ROM, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-ROM, DVD-RW
Supported video modes	-
Card reader integrated	No
USB 2.0 ports quantity	1
Audio formats supported	MP3, WMA
Image formats supported	JPG
Video formats supported	AVCHD, DIVX, MKV, MPEG2, MPEG4
Number of products included	1 pc(s)
Power consumption (standby)	0.5 W
Power consumption (typical)	12 W
Consumer Electronics Control (CEC)	SimpLink
Audio output channels	2.0 channels
Ethernet LAN (RJ-45) ports	0