Press        button to turn on the indoor.
1
Press        button to select Heating mode.
2
Adjust the desired temperature by pressing             buttons.
When setting the desired temperature lower than room temperature, 
there is only ventilation wind.
3
Heating Mode
❖ Setting Temp Range : 16˚C~30˚C.
1. Wired Remote Controller
2. Wireless Remote Controller
Set the desired temperature by pressing TEMP button.
Press ROOM TEMPERATURE CHECKING button to check the room
temperature. 
When setting the desired temperature is lower than room
temperature, heating wind isn’t blow out.
3
Set the fan speed again. You can select the fan speed in four
steps–low, medium, high, or chaos. Each time the button is pressed,
the fan speed mode is shifted.
4
Press the ON/OFF button.
The unit will respond with beep sound.
1
Press MODE button to select Heating Mode.
2