12
Phone Overview
1. Earpiece Lets you hear the caller.
2. Touch Soft Keys Touch Keys on this Touchpad
provide easy access to Messages, the Call
Dialpad, Menu, Contact List, and Favorites which
easily activate with the touch of your fingertip.
3. SEND Key Use to make and answer Calls.
4. Clear Key / Voice Command Key Deletes single
spaces or characters with a quick touch, but
touch and hold to delete entire words. Also
backs out of menus, one level at a time. While
in Standby mode, use for quick access to
Voice Command or press and hold to access
Voice Recorder.
5. Headset Jack Allows you to plug in an optional
headset for convenient, hands-free
conversations.
Plug headphones or a headset into
the 3.5mm jack located on the top right of device.
6. Proximity Sensor When close (within 2-3 cm) to
this sensor during a call, LCD turns off allowing
you to only adjust volume or end the call so that
you don't inadvertently activate a feature. When
blocked with phone case or etc., LCD backlight
turns off also. When using speakerphone,
Bluetooth or Headset jack, Sensor does not work.
7. Light Sensor Detects the amount of light, adjusts
brightness of the LCD. It conserves power and
extends LCD screen life.
5. Headset Jack
1. Earpiece
3. SEND Key
4. Clear Key / Voice
Command Key
9. Shortcut Menu
Touch Key
10. My Music Key
8. Touch Screen
11. PWR/END Key
2. Touch Soft Keys
7. Light Sensor
6. Proximity Sensor
NOTE
SEND Key, CLR / Voice Commands Key, and PWR / END Key are not illuminated when the display is locked.
Press the Unlock Key, or any other exterior key, to illuminate the display and keys. To unlock the screen and
keys, touch then move your finger upwards to reveal the Standby mode Touch Screen and Touch Soft
Keys.
To Next Page
Loading...
