To Next Page

To Previous Page

USINGTHEPROJECTOR

ConnectingtoanAntennaorCable

To watch TV using an indoor/

outdoor antenna, connect a wall

terminal and the

port of the Projector using an RF

cable (75 Ω).

You can watch terrestrial or cable

(analog or digital) TV.

(The RF cable is sold separately.)

• Make sure not to bend the copper wire of the RF cable (75 Ω). Turn

the input jack to the right to fasten it.

Copper wire

• Ensure you use a standard coaxial cable (75 Ω, sold separately)

when connecting to the projector input.

• For better image quality in locations where signal strength is low,

purchase and install a signal amplifier (booster).

• A signal splitter is required if you want to use two or more projectors

through one antenna.

• If you have any problems when installing the antenna, please consult

a suitable retailer or the store where you purchased the antenna.

NOTE

Questions and Answers:

Need help?

Do you have a question about the LG CineBeam PH510P and is the answer not in the manual?

LG CineBeam PH510P Specifications

General

Display Type	DLP
Contrast Ratio	100, 000:1
Light Source	LED
Screen Size	25" ~ 100"
Throw Ratio	1.4
Built-in Battery	Yes (up to 2.5 hours)
Bluetooth Sound Out	Yes
HDMI	1
USB Type-A	1
Aspect Ratio	16:9
Zoom	Fixed
Digital Keystone Correction	Auto Keystone (Vertical)
Resolution	1280 x 720 (HD)
Lamp Life	Up to 30, 000 hours
Wireless Screen Share	Yes
Output Ports	Headphone Out
Dimensions	6.9" x 4.3" x 1.7"