1-7
1) Change function to DVD/CD by pressing input key, and wait until home menu is shown.
- Do not insert disc or USB at the set.
2) Press "PAUSE 1 4 7 2" in order.
3) and then, option setting menu is displayed.
You can see 10 bytes option value.
Ex ) F9 00 C1 D4 00 11 90 10 E0 08
4) Move a cursor by pressing Arrow < > key.
5) Press Num key what you want to change.
6) Press "PAUSE" key to exit option setting menu.
After change option value, you need to make system reset.
1) Change function to DVD/CD by pressing input key, and wait until home menu is shown.
- Do not insert disc or USB at the set.
2) Go to SETUP menu by pressing SETUP button in HOME menu.
3) Move highlight at "DISPLAY -> TV Aspect -> 16:9".
4) Press "1 3 9 7 1 3 9 Enter" in order.
5) and then, system reset menu is displayed.
6) Power off and on by pressing POWER key.
EEPROM OPTION SETTING
SYSTEM RESET
To Next Page
Loading...
Need help?
General
