Operating18
Operating
3
Sleep Timer Setting
Press SLEEP repeatedly to select delay time
between 10 and 180 minutes. After the delay time,
unit will turn o.
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
y
You can check the remaining time before
the unit turns o.
y
Press SLEEP. The remaining time appears in
the display window.
y
Sleep function will working after dimmer.
,
Note
Dimmer
Press SLEEP once. The display window will be
darkening by half. To cancel it, press SLEEP
repeatedly until dim o. If touch the buttons in
Sleep Timer mode, the buttons will be lightening
for 5 seconds and darkening again.
Auto power down
This unit will turn o itself to save electric
consumption in the case were main unit is not
connected to external device and is not used for 25
minutes.So does this unit after six hours since Main
unit has been connected to other device using
analogue input.
Advanced Operations
Playing the iPhone/iPod
You can enjoy the sound with your iPhone/iPod.
For details about iPhone/iPod, refer to the iPhone/
iPod User Guide.
1. Connect the iPhone/iPod firmly.
If you turn this unit on, your iPhone/iPod is
automatically turned on and recharging starts.
2. Press FUNC. on the unit or F (FUNCTION) on
the remote control to select iPod function. You
can operate your iPhone/iPod through an iPod’s
display by using the supplied remote control
and also control on your iPhone/iPod.
CM2730-AM_DCOLLLK_ENG.indd 18 2013-04-18 �� 1:42:52
To Next Page
Loading...
