LG CM8520 - Recording to USB

Operating 23
Operating
3
Recording to USB
You can record a various sound source to USB.
(CD, USB, AUX, PORTABLE, FM, AM)
1. Connect the USB device to the unit.
2. Select a function in which you want to record
by using CD, USB, TUNER, or AUX/PORT. IN on
the unit or FUNCTION on the remote control.
One track/file recording - You can record to USB
after playing a track/file you want.
All tracks/files recording - You can record to USB
after stop.
Program list recording - After showing the
programmed list, you can record it to USB.
(Refer to the page 17)
3. Press USB REC on the unit or USB REC on
the remote control.
- If you connect both of USB1 and USB2, press
T
ST./MONO to record to USB1 or press
I
to record to USB2.
4. To stop recording, press
I
on the unit or
Z
ENTER on the remote control.
To select recording bit rate and
speed
1. Press USB REC on the unit or USB REC on
the remote control for longer than 3 seconds.
2. Press
C
/
V
on the remote control or
Y
/
U
on the unit to select a bit rate.
3. Press USB REC on the unit or USB REC on
the remote control again to select the recording
speed.
4. Press
C
/
V
on the remote control or
Y
/
U
on the unit to select a desired
recording speed. (AUDIO CD only)
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
5. Press USB REC on the unit or USB REC on
the remote control to finish the setting.