Operating16
Operating
3
Sound adjustment
Setting the surround mode
This system has a number of pre-set surround
sound elds. You can select a desired sound mode
by using EQ.
The displayed items for the Equalizer may be
dierent depending on sound sources and eects.
On Display Description
AUTO EQ
Sets the sound equalizer on the
mode that is the most similar to
the genre which is included in
the MP3 ID3 tag of song les.
POP
CLASSIC
JAZZ
ROCK
This program lends an
enthusiastic atmosphere to the
sound, giving you the feeling
you are at an actual pop,classic,
jazz or rock concert.
BYPASS
You can enjoy the sound
without equalizer eect.
BASS BLAST
(BASS)
Reinforces the treble, bass and
surround sound eect.
Maybe you need to reset the surround mode,
after switching the input, sometimes even
after the sound track changed.
,
Note
Listening to music
from your external
device
The unit can be used to play the music from many
types of external device. (Refer to the page 12)
1. Connect the external device to the PORT. IN
connector of the unit.
2. Turn the power on by pressing
1
/
!
.
3. Select the PORTABLE function by pressing
FUNC. on the unit.
4. Turn the external device and start playing
music.
Auto Power Down
This unit will be o itself to save electronic
consumption in the case main unit is not
connected to external device and is not used for 20
minutes. So does this unit after 6 hours since Main
unit has been connected to other device using
analog input.
CM1530-FB_AAUSLLK_ENG_6580.indd 16 2014-02-18 10:37:32
To Next Page
Loading...
Need help?
General
