Operating12
Operating
3
Basic Operations
CD/USB Operations
1. Insert the disc by pressing OPEN/CLOSE on the
remote control or
R
on the unit.
Or connect the USB device to the USB port.
2. Select the CD or USB function by pressing
FUNCTION on the remote control or F on the
unit.
3. Select a track/file you want to play by pressing
Cc/vV
on the remote control or
Y/U
on the unit.
To Do this
Stop
Press
Z
ENTER on the remote
control or
I
on the unit.
Playback
Press
d
/
M
on the remote control
or
T
on the unit.
Pause
During playback, press
d
/
M
on the
remote control or
T
on the unit.
Skip to the
next/previous
track/le
Press
Y/U
on the unit or
Cc
/
vV
on the remote
control to skip the track/le in stop
status.
During playback, press
U
on the
unit or
vV
on the remote
control to go to the next track/le.
Playing less than 2 seconds, press
Y
on the unit or
Cc
on
the remote control to go to the
previous track/le.
Playing after 3 seconds, press
Y
on the unit or
Cc
on
the remote control to go to the
beginning of the track/le.
Search for
a section
within a track
Press and hold
Y/U
on the
unit or
Cc
/
vV
on the
remote control during playback
and release it at the point you want
to listen to.
Play
repeatedly or
randomly
Press MENU/REPEAT on the
remote control repeatedly, the
display change in the following
order.
RPT1 -> RPT DIR (only MP3/WMA)
-> RPT ALL -> RANDOM -> OFF
Selecting a folder
1. Press PRESET/FOLDER
W
/
S
on the remote
control repeatedly until a desired folder appears.
2. Press
d
/
M
on the remote control or
T
on the
unit to play it. The first file of folder will play.
Displaying file information
(ID3 TAG)
While playing an MP3 le containing le
information, you can display the information by
pressing INFO.
CM2520-FU.ARUSLLK_eng.indd 12 2012-05-11 4:25:16