LG Code Zero A9 Series - Disassembly, Assembly, and Repair; Replacing the Mop Nozzle PCB

-32-
Disassembly, assembly and repairing of main parts
6. Remove the PCB of Mop Nozzle
(1) Remove 4 screws after detach
the mop Pads
•
Screw (Left side) :
Counterclockwise
•
Screw (Right side) : Clockwise
Be sure to use manual driver. (Do not
use an electric driver.)
(2) Remove 12 screws
(3) Remove the top cover
(4) Remove the 2 parts marked
the arrows.
(5) Remove the all harness
connectors on the PCB.
(6) Remove the part from the
picture.
(7) Replace the PCB (8) Reassemble in the reverse sequence.
* Be sure use the new screws when to Fasten the screws on the mop
attachment plate.
* When assembly the mop plate.
- Screw (Left side) : Clockwise
- Screw (Right side) : Counterclockwise