This document is an owner's manual for an LG Vacuum Cleaner, model A9********. It provides comprehensive information on the appliance's installation, operation, smart functions, and maintenance.
Function Description
The LG Vacuum Cleaner is designed for normal indoor domestic use. Its primary function is to clean various surfaces using suction and specialized nozzles. Some models also include a mop nozzle for wet cleaning. The vacuum cleaner features a Kompressor lever to compress dust and fibers in the dust bin, allowing for longer vacuuming periods and easier, less messy dust bin cleaning. It can be used with one or two rechargeable lithium-ion batteries, depending on the model, and comes with a charging station for convenient storage and recharging. The appliance also integrates with the LG ThinQ application, offering smart functions like cleaning history, filter cleaning cycle alarms, and Smart Diagnosis™ for troubleshooting.
Important Technical Specifications
- Model Name: A9********
- Dimensions (Width x Depth x Height): 10.2 in x 10.6 in x 44.1 in (260 mm x 270 mm x 1120 mm) for the assembled product body, extension pipe, and nozzle.
- Weight: Approximately 5.95 lb (2.7 kg)
- Power Consumption:
- Turbo Mode: 370 W (Maximum 590 W)
- Power Mode: 120 W
- Normal Mode: 68 W
- Battery Type: Rechargeable Lithium-ion Battery (Model Name: EAC63382208)
- Battery Rated Capacity: DC 25.9 V, 2.4 Ah/62.16 Wh (Min. 2.3 Ah/59.57 Wh)
- Battery Run Time (Using two batteries):
- With Nozzle: Up to 12 minutes (Turbo), 40 minutes (Power), 80 minutes (Normal)
- With Tool: Up to 14 minutes (Turbo), 60 minutes (Power), 120 minutes (Normal)
- Battery Run Time (Using one battery):
- With Nozzle: Up to 6 minutes (Turbo), 20 minutes (Power), 40 minutes (Normal)
- With Tool: Up to 7 minutes (Turbo), 30 minutes (Power), 60 minutes (Normal)
- Recommended Maximum Run Time with Mop Nozzle: 80 minutes (to prevent motor overheating).
- Charging Station Model: VDS-ST1****
- Charging Station Input: 120 V~ 60 Hz
- Charging Station Output: DC 28.3 V / 1.15 A
- Charging Station Power Consumption: 9 A (Cleaning), 0.6 A (Charging)
- Wi-Fi Network: Supports 2.4 GHz Wi-Fi networks only.
- Wireless LAN Module Frequency Range: 2412-2462 MHz
- Wireless LAN Module Output Power (Max): < 30 dBm
Usage Features
- Adjustable Suction Power: The appliance offers Normal, Power, and Turbo modes, which can be adjusted using buttons on the handle. Turbo mode can be activated by pressing and holding the '+' button for more than 3 seconds from Power mode.
- Extension Pipe: The extension pipe can be adjusted to four different lengths by pressing a length adjustment button.
- Nozzles and Tools: The vacuum cleaner comes with various attachments for different cleaning needs:
- Universal Nozzle: For carpets and rugs.
- Slim Hard Floor Nozzle: For hard floor surfaces.
- Bedding Nozzle: For cleaning sheets and bedding, using strong suction and a punching motion.
- Pet Nozzle: For soft surfaces and pet hair removal.
- Combination Tool: Can be used in crevice or brush mode for cleaning corners and small gaps.
- Crevice Tool: For removing dust from corners and narrow spaces, also effective for areas with static electricity and pet hair in Turbo mode.
- Hard Dirt Tool: Features firm bristles for solidified dirt on hard surfaces and entangled hair/foreign objects on carpets/rugs.
- Mattress Tool: For dust and foreign objects from mattresses, delicate fabrics, and upholstery.
- Multi-angle Tool: A soft brush adjustable to various angles for cleaning vehicle consoles or furniture tops.
- Flexible Crevice Tool: Flexible and adjustable length for cleaning inside vehicles or narrow spaces.
- Flexible Hose Extension: Connects between the product body and tools to clean hard-to-reach areas (cannot be used with the Nozzle).
- Kompressor Lever: Compresses hair and fibers inside the dust bin, increasing capacity and making emptying easier. Must be used when the vacuum is off and the dust bin is at least half full.
- Mop Nozzle (available on some models):
- Operates only the mop function; suction is turned off when attached.
- Mop plates rotate at a constant speed.
- Water tank can be filled with water (no detergents or other liquids).
- Water adjustment button at the rear of the mop nozzle allows for High, Low, or STOP water supply.
- Uses standard mop pads for general cleaning and heavy-duty mop pads for stubborn stains.
- Charging Station: Automatically recharges the main battery when the appliance is stored. An auxiliary battery (if provided) charges after the main battery is full.
- Display Indicators: The handle displays indicators for clogged objects, filter cleaning cycle alarms, Wi-Fi connection status, and remaining battery charge.
- Safety Features:
- Built-in safety device to prevent overheating; appliance automatically turns off if overheated.
- Clogged objects indicator and automatic shut-off if clogging persists.
- Mop plate automatically stops if foreign objects are stuck or if subjected to strong impact.
- LG ThinQ Application: Connects the appliance to a smartphone for features like cleaning history, filter cleaning cycle alarms, cleaning mode display, filter cleaning guide, and Smart Diagnosis™ for troubleshooting.
Maintenance Features
- Dust Bin Cleaning: Empty and clean the dust bin after every use. The Kompressor lever helps compact dust for easier removal. The cyclonic mesh filter should be removed and cleaned under running water.
- Filter Cleaning: The cyclonic mesh filter, exhaust filter, and pre-filter should be cleaned regularly (at least once a month) under running water to maintain optimum suction power. They must be completely dry (24 hours in a well-ventilated area out of direct sunlight) before reassembling to prevent odor and malfunction.
- Nozzle Cleaning:
- Universal Nozzle: Clean the brush and roller heads regularly.
- Slim Hard Floor Nozzle: Remove the rotating brush and clean foreign objects and dust from the brush and nozzle bottom using a damp towel or cloth. Tweezers can be used for rollers.
- Pet Nozzle: Remove the rotating brush and clean foreign objects and dust from the brush and nozzle bottom using a damp towel or cloth. Tweezers can be used for rollers.
- Bedding Nozzle: Clean foreign objects and dust from the bottom of the nozzle using a crevice tool and vacuum, then wipe with a damp towel or cloth.
- Mop Nozzle: Clean foreign objects and dust from the bottom of the mop nozzle using a damp towel or cloth. Tweezers can be used for rollers.
- Water Tank Drying (Mop Nozzle): After use, empty the water tank, leave the inlet caps open, and allow it to dry in a well-ventilated area out of direct sunlight for at least 24 hours to prevent odors.
- Mop Pad Drying: Hand wash mop pads with a neutral detergent after use and allow them to dry completely in a well-ventilated area out of direct sunlight for at least 24 hours. Do not use bleach, fabric softener, or a clothes dryer, and do not boil them.
- Troubleshooting Guide: The manual includes a comprehensive troubleshooting section for common issues related to operation, suction power, charging, strange odors, noise, and Wi-Fi connectivity, along with possible causes and solutions.
- Consumables: Mop pads, batteries, exhaust filter, and pre-filter are consumables and will eventually need replacement. Contact an LG Electronics customer service center for these parts.
Need help?
General
To Next Page