12
Attachment Storage
When not in use, the crevice and brush attachments
can be snapped onto the ports at the bottom of the
charging station.
1
Attach the combination tool and crevice tool to
the dedicated holders.
2
Press and hold the inlet removal button and pull
downward to remove the combination tool or
crevice tool.
Nozzle Storage
When a nozzle is not in use, store it in the convenient
detachable nozzle storage (optional) so you can
easily nd it.
1
To store, slide the hook on the nozzle into the
cradle.
2
Lift the nozzle to remove it from the cradle.
•
The nozzle storage cradle is compatible with the
Power carpet nozzle.
To Next Page
Loading...
