THE INDOOR UNIT INSTALLATION
33
ENGLISH
For Concealed Installation
1 Remove the 6 screws.
2 Remove the Upper Deco cover.
3 Remove the Side Deco covers.
For Side Piping
1 Remove the Deco Covers.
2 Remove the slit portions
3 Assemble the Deco Covers.
Preparation / For Moldings , Side
Piping, and Concealed Installation
For Moldings
1 Remove the slit portions on the Rear
Panel.
Upper
Deco cover
Side
Deco cover
45
90 75
Left bottom
piping
Right bottom
piping
Left/right piping
Right back piping
60
40
50
Wall
45
90
75
Left back
piping
Right back
piping
45
Refrigerant Piping
1 The location of hole is different depending
on which side of the pipe is taken out.
2 Drill a hole (Ø 70 mm)in the point indicated
by symbol in the illustration as below
NOTE
The suggested shortest pipe length is
5 m, in order to avoid noise from the
outdoor unit and vibration.
(Unit: mm)
To Next Page
Loading...
Need help?
General
