LG CT24F Installation Manual

54
THE INDOOR UNIT INSTALLATION
ENGLISH
SMART DIAGNOSIS
(Optional)
Diagnosis of operating information
1 Enter the Installer Code and set the code
to 57.
2 Click the “Receive” button on the main
screen of LG AC Smart Diagnosis App on
your smart phone.
3 Press and hold your smart phone close
to the indoor unit.
4 Receive the buzzer beeps from indoor unit
with your smart phone.
5 The diagnosis of operating information will
be displayed on the screen of your smart
phone.
Diagnosis of error information
1 Enter the Installer Code and set the code
to 58.
2 Click the “Receive” button on the main
screen of LG AC Smart Diagnosis App on
your smart phone.
3 Press and hold your smart phone close
to the indoor unit.
4 Receive the buzzer beeps from indoor unit
with your smart phone.
5 The diagnosis of operating information will
be displayed on the screen of your smart
phone.
* How to set the code
Set the code you want by pressing TEMP
button ( _) and press .
NOTE
- Be sure to keep ambient noise to a
minimum or the smart phone may not
correctly receive the buzzer beeps from
the indoor unit.
- Initialization of diagnosis data may take
approximately 1 minute after supplying
the AC power .
- The code No. 57 is used for confirming
the diagnosis data which is updated on
while the indoor unit is operating
- The code No. 58 is used for confirming
the diagnosis data which is the occurred
time of Error Code.
* How to enter the installer mode
Press Reset Button and ‘A’ Button ( )
A
Press
SETUP
_
10 digit
1 digit

LG CT24F Specifications

General

Brand	LG
Model	CT24F
Category	Air Conditioner
Language	English