34
t You can change the Network SSID (name) that other devices see when scanning for Wi-Fi networks.
t You can also tap the Security menu to configure the network with Wi-Fi Protected Access 2 (WPA2)
security using a pre-shared key (PSK).
t If you touch the WPA2 PSK security option, a password field is added to the Set up Wi-Fi hotspot
dialogue box. If you enter a password, you will need to enter that password when you connect to the
phone's hotspot with a computer or other device. You can set Open in the Security menu to remove
security from your Wi-Fi network.
3 Tap Save.
ATTENTION! If you set the security option as Open, you cannot prevent unauthorised
usage of online services by other people and additional charges may be incurred. To
avoid unauthorized usage, you are advised to keep the security option active.
Wi-Fi Direct
Wi-Fi Direct supports a direct connection between Wi-Fi enabled devices without an access point. Due to the
high battery usage of Wi-Fi direct, it is recommended that you plug your phone into a power outlet while using
the Wi-Fi Direct feature. Check your Wi-Fi & Wi-Fi Directed network in advance and make sure the users are
connected to the same network.
SmartShare
You can use the SmartShare feature easily in the Gallery, Music, Video apps, etc.
Enjoying content via a variety devices
You can share your phone's content with a variety devices. Tap
to share the contents in the Gallery, Music,
Videos, ThinkFree Viewer.
Playing/Sending
Play: You can play the content via a TV, a Bluetooth speaker or etc.
Beam: You can send the content to the device of Bluetooth and SmartShare Beam supported.
t SmartShare Beam: Transferring the content feature fast via Wi-Fi Direct.
Connecting to Networks and Devices
To Next Page
Loading...
Need help?
General
