19INSTALLATION
ENGLISH
• Be sure to support the weight of the door before
removing the hinge screws.
5 Hold the hinge in place while removing the
four hinge screws (to prevent the door from
dropping).
6 Remove the door from the cabinet cover.
7 Move the door to the left side and line up the
holes in the hinge with the holes in the
cabinet.
• Be sure to support the weight of the door before
inserting the hinge screws.
8 Hold the hinge in place while inserting the
two hinge screws (to prevent the door from
dropping).
9 Insert the latch on the right side and install
the latch screws.
10 Insert the four decorative screws on the right
side.
11 Check that the door closes and latches
properly.
To Next Page
Loading...
Need help?
General
