LG DLE5001 Series - User Manual

Questions and Answers

B
Brittany GonzalesAug 10, 2025
What to do if FLOW SENSE indicator shows four bars on my LG Dryer?
- J
  Joseph JacksonAug 10, 2025
  If the FLOW SENSE indicator shows four bars during the drying cycle on your LG dryer, this indicates restrictions in the external dryer venting, ductwork due to lint buildup or debris, or many turns/restrictions in the ductwork. Consider installing a shorter or straighter duct run. The ductwork should be checked and cleaned soon. The dryer can still be used, but drying times may be longer. Note that if exhaust restrictions are sensed by the FLOW SENSE system, the indicator will remain on for two hours after the cycle ends. Opening the door or pressing the POWER button will reset it.
E
Emily GomezAug 17, 2025
What to do if my LG Dryer displays PS, PF, or nP?
- Z
  zvaughnAug 17, 2025
  If your LG dryer displays PS, PF, or nP, it indicates that the electric dryer power cord isn't correctly connected, or the house power supply is incorrect. It can also mean that a house fuse is blown, the circuit breaker has tripped, or there's a power outage. Check the power supply and the power cord connection to the terminal block, referring to the Connecting electric dryers section of this manual for instructions. Also, reset the circuit breaker or replace the fuse, without increasing its capacity. If there's a circuit overload, have it corrected by a qualified technician.
T
Tony RossAug 25, 2025
What does tE1 or tE2 error mean on my LG DLE5001 Dryer?
- R
  Robin PrestonAug 25, 2025
  The error codes tE1 or tE2 on your LG dryer indicate a temperature sensor failure.
K
Kelly GarciaSep 2, 2025
What does HS error mean on my LG DLE5001 Dryer?
- J
  Joseph NguyenSep 2, 2025
  The HS error code on your LG dryer indicates a humidity sensor failure.