41
ENGLISH
OPTIONAL ACCESSORIES
Stacking kit installation (cont.)
3. Place the dryer on top of the washer by fitting the dryer feet
into the side brackets as illustrated. Avoid finger injuries; do
not allow fingers to be pinched between the washer and dryer.
Slowly slide the dryer toward the back of the washer until the
side bracket stoppers catch the dryer feet.
4. Insert the front rail between the bottom of the dryer and the
top of the washer. Push the front rail toward the back of the
washer until it comes in contact with the side rail stoppers.
Install the two remaining screws to secure the front rail to the
side rails.
To Next Page
Loading...
Need help?
General
