To Next PageTo Next PageHow to fix an LG DLEX4270W that will not turn on?
If your LG dryer won't turn on, first ensure the power cord is securely plugged into a grounded outlet that matches the dryer’s rating plate. Also, check your house fuse or circuit breaker. Reset the circuit breaker or replace the fuse. If a circuit overload is the issue, have it corrected by a qualified electrician.
Why is my LG DLEX4270W not heating up?
If your LG dryer is not heating, check the following: * Ensure that the house fuse hasn't blown or the circuit breaker hasn't tripped. Reset the breaker or replace the fuse, without increasing its capacity. If you suspect a circuit overload, contact a qualified electrician. * For gas models, verify that both the house gas shutoff and the dryer gas shutoff are fully open.
How to prevent lint on clothes in my LG DLEX4270W?
If you notice lint on your clothes after drying in your LG dryer, consider these potential causes: * Ensure the lint filter is cleaned before every load. * Sort laundry properly, separating lint producers (like cotton towels) from lint trappers (like linen pants). * Avoid overloading the dryer by dividing larger loads into smaller ones. * Always check pockets thoroughly before washing and drying clothes to remove any tissue or paper.
What to do if there is excess static in clothes after drying in LG Dryer?
To reduce excess static in clothes after drying in your LG dryer: * Use a fabric softener correctly. * Adjust settings to use a shorter drying time, or use SENSOR DRY cycles to prevent overdrying. * Be aware that drying synthetics, permanent press, or synthetic blends can cause static buildup; using a fabric softener may help.
Why are there greasy spots on clothes after using my LG DLEX4270W?
If you find greasy or dirty spots on clothes after drying them in your LG dryer, it could be due to a few reasons. First, check that you are using fabric softener correctly, following the provided instructions. Also, ensure you only dry clean items together, as dirty items can transfer soil to clean clothes. Stains on dried clothes may actually be stains that weren't removed during washing, so ensure clothes are thoroughly cleaned according to the instructions for your washer and detergent.
What does error code tE1 or tE2 mean on my LG DLEX4270W?
If your LG dryer displays error code tE1 or tE2, the thermistor may be malfunctioning. Turn off the dryer and call for service.
General| Brand | LG |
|---|---|
| Model | DLEX4270W |
| Appliance Category | Dryer |
| Type | Electric |
| Fuel Type | Electric |
| Capacity | 7.4 cu. ft. |
| Color | White |
| Steam Technology | Yes |
| Energy Star Certified | Yes |
| Wi-Fi Connectivity | Yes |
| Steam Cycle | Yes |
| Sensor Dry | Yes |
| Number of Options | 12 |
| Dry Levels | 5 |
| Temperature Settings | 5 |
| Reversible Door | Yes |
| SmartDiagnosis | Yes |
| Steam Function | Yes |
| Wi-Fi Enabled | Yes |
| SmartThinQ Compatible | Yes |
| Height | 39 inches |
