To Next PageTo Next PageHow to fix an LG DLEX4371 that won't turn on?
If your LG Dryer won't turn on, ensure the power cord is securely plugged into a grounded outlet that matches the dryer's rating plate. Also, check your house fuse or circuit breaker. Reset the breaker or replace the fuse, but do not increase the fuse capacity. If a circuit overload is the issue, have a qualified electrician correct it.
Why is my LG DLEX4371 not heating up?
If your LG Dryer isn't heating, first check your house fuse or circuit breaker and reset it or replace the fuse if needed, without increasing its capacity. For gas models, ensure both the house gas shutoff and the dryer gas shutoff are fully open. Also, if you're using the Cotton/Normal cycle, try deselecting the Energy Saver option, as it adds an air dry section at the beginning, which means you won't feel heat right away.
Why LG DLEX4371 not turning on?
Your LG dryer might not be turning on because the power cord isn't properly plugged into the grounded outlet. Ensure the plug is securely connected to an outlet that matches the dryer's rating plate. Also, check if a house fuse is blown, the circuit breaker has tripped, or a power outage has occurred. Reset the circuit breaker or replace the fuse. If it is a circuit overload, have it corrected by a qualified electrician.
What to do if my LG DLEX4371 Dryer does not heat?
If your LG dryer isn't heating, first check if a house fuse is blown, the circuit breaker has tripped, or there's a power outage. Reset the breaker or replace the fuse, without increasing its capacity. For gas models, ensure both the house and dryer gas shutoffs are fully open. Also, if you're using the Cotton/Normal cycle, deselect the Energy Saver option, as it adds an air dry section, and it's normal to feel no heat at the beginning of the cycle in this mode.
How to prevent lint on clothes in LG Dryer?
To prevent lint on clothes when using your LG Dryer, clean the lint filter before every load, and possibly during the cycle if you're drying items that produce a lot of lint. Sort your laundry properly, separating lint producers from lint trappers. Avoid overloading the dryer by dividing larger loads into smaller ones. Always check pockets thoroughly before washing and drying clothes to remove any tissue or paper.
Why is there lint on clothes after drying in my LG Dryer?
If you notice lint on clothes after drying in your LG dryer, ensure you clean the lint filter before every load and, for loads producing a lot of lint, during the cycle. Sort your laundry properly, separating lint producers from lint trappers. Also, avoid overloading the dryer by dividing larger loads into smaller ones, and always check pockets for tissues or paper before washing and drying clothes.
What to do if clothes have excess static after drying in LG DLEX4371 Dryer?
To reduce excess static in clothes after drying in your LG Dryer, use a fabric softener correctly, following the manufacturer's instructions. Also, avoid overdrying your clothes by adjusting settings to use a shorter drying time or using SENSOR DRY cycles. Be aware that synthetic materials, permanent press fabrics, and synthetic blends can cause static buildup, so using a fabric softener can help.
Why does my LG DLEX4371 leave greasy spots on clothes?
If you notice greasy or dirty spots on clothes after using your LG Dryer, ensure you're using fabric softener correctly by following the provided instructions. Avoid drying clean and dirty clothes together, as dirty items can soil clean ones. Also, ensure clothes are being completely cleaned during the washing process to remove stains before drying.
What does error code tE1 or tE2 mean on my LG Dryer?
If your LG Dryer's display shows error code tE1 or tE2, it indicates that the thermistor is malfunctioning. Turn off the dryer and call for service.
Why excess static in clothes after drying in LG DLEX4371 Dryer?
If you have excess static in clothes after drying with your LG dryer, it may be caused by not using fabric softener, or using it incorrectly. Make sure to use fabric softener correctly. Overdrying laundry can also cause static, so adjust settings for a shorter drying time or use SENSOR DRY cycles. Static buildup can also happen when drying synthetics, permanent press, or synthetic blends; try using a fabric softener with these materials.
General| Type | Electric |
|---|---|
| SmartDiagnosis | Yes |
| Sensor Dry | Yes |
| Color | White |
| Wrinkle Care Option | Yes |
| Moisture Sensor | Yes |
| Dryer Venting | Vented |
| Width | 27 inches |
| Height | 39 inches |
