What to do if garments are too damp after REDUCE STATIC on my LG DLEX8000?
If your LG Dryer leaves garments too damp or too dry after using the REDUCE STATIC option, it might be due to incorrect drying options being selected. To resolve this, manually select the load weight before starting the REDUCE STATIC option.
What to do if odors remain in clothing after STEAM FRESH™ cycle in my LG DLEX8000 Dryer?
If odors remain in clothing after using the STEAM FRESH™ cycle on your LG Dryer, it means the cycle didn't completely remove the odor. For fabrics with strong odors, wash them in a normal cycle.
What to do if steam doesn’t generate on my LG DLEX8000?
If steam doesn’t generate but no error code is shown on your LG Dryer, it could be due to a water level error. Unplug the dryer and call for service.
Why is water dripping from the nozzle when steam cycle starts on my LG DLEX8000 Dryer?
If you notice water dripping from the nozzle when the steam cycle starts on your LG Dryer, this is normal. It's just steam condensation, and the dripping will stop shortly.
What to do if there are no creases left on garment after STEAM FRESH™ cycle of LG Dryer?
If there are no creases left on garment after using the STEAM FRESH™ cycle on your LG Dryer, it is because the function of this cycle is to remove wrinkles from fabric. Use an iron to make creases.
Why is water dripping from the door during steam cycle of my LG DLEX8000?
If you observe water dripping from the door during the steam cycle of your LG Dryer, this is normal. It is simply steam condensation on the door surface.
Why can't I see steam vapor at the beginning of steam cycle on my LG Dryer?
If you cannot see steam vapor at the beginning of the steam cycle on your LG Dryer, this is normal. Steam is released at different stages of the cycle for each option.
Why doesn't the drum turn during steam cycle on my LG DLEX8000?
If the drum does not turn during the steam cycle of your LG Dryer, this is normal. The drum is turned off so that the steam vapor remains in the drum.
Why are garments not uniformly damp after EASY IRON cycle on my LG DLEX8000 Dryer?
If garments are not uniformly damp after using the EASY IRON setting on your LG Dryer, this is normal. It depends on the amount or type of garments.
Why are my garments still wrinkled after STEAM FRESH™ cycle on my LG DLEX8000?
If your LG Dryer leaves garments still wrinkled after using the STEAM FRESH™ cycle, it may be due to overloading the dryer or mixing different types of garments. For best results, use small loads of 1 to 5 similar items.
Covers overall safety warnings, grounding, and gas leak procedures.
Guidelines for handling electronic components to prevent ESD damage.
Details and availability of optional dryer accessories like stacking kits and pedestals.
Step-by-step guide for installing the dryer rack inside the drum.
Instructions for safely installing the stacking kit to place the dryer on a washer.
Guide for assembling and installing the dryer pedestal for elevated placement.
Steps for installing the Wi-Fi modem to enable smart features and monitoring.
Covers connecting the gas supply and high-altitude considerations.
Instructions for 4-wire power cord and direct wire connections.
Instructions for 3-wire power cord and direct wire connections.
Overview of steam cycles, default times, and fabric recommendations.
Common problems and solutions for steam dryer functions.
Explanation of error codes displayed by the dryer and their causes.
Explanation of the FlowSense function and its role in detecting duct clogs.
Procedure to test the dryer's exhaust system for proper airflow and restrictions.
Procedures for testing electrical supply, thermistors, motor, sensors, switches, and heaters.
Procedures for testing gas valve operation and generator assembly heating.
Testing the DC pump and generator assembly for proper operation.
Details on PCB power connections and status mode operations.
Steps to safely remove the dryer's top plate for access to internal components.
Instructions for removing the panel drawer, PCB, and control panel assemblies.
Procedure for removing the dryer's cabinet cover for servicing.
Steps to remove the guide assembly, including pump and generator.
Instructions for disassembling body frames and panel frames.
Steps for accessing and replacing the drum assembly and drum lamp.
Illustrated breakdown of the control panel and plate components.
Illustrated breakdown of the panel drawer and guide assembly parts.
Illustrated breakdown of the cabinet and door components for gas models.
Illustrated breakdown of the drum and motor assembly parts for gas models.
To Next Page
General
