Need help?Do you have a question about the LG DLEX8388WM and is the answer not in the manual?
General| Brand | LG |
|---|---|
| Model | DLEX8388WM |
| Appliance Category | Dryer |
| Type | Electric |
| Weight | 130.1 lbs |
| Steam Technology | Yes |
| Energy Star Certified | Yes |
| Smart Features | Yes |
| Steam Function | Yes |
| Smart Technology | Yes |
| Color | White |
| Dryer Venting | Vented |
| Number of Drying Racks | 1 |
| Number of Cycles | 14 |
| Number of Temperature Settings | 5 |
| Wi-Fi Enabled | Yes |
| Wrinkle Care Option | Yes |
| TurboSteam | Yes |
| LoDecibel Quiet Operation | Yes |
| Height | 41 1/4 in |
| Width | 27 inches |
Advises disconnecting power before servicing and handling heavy appliances.
Precautions for handling static-sensitive electronic components.
Warnings for service personnel regarding electrical and gas hazards.
Instruction to properly re-fasten grounding components after service.
Emergency steps to take if gas leakage is detected.
Guide for installing the power cord for 4-wire and 3-wire receptacles.
Instructions for connecting the dryer using a 3-wire receptacle.
Securing terminal block covers and ensuring safe connections.
Safety precautions and instructions for connecting the gas supply.
Wiring diagram for the electric dryer's electrical components.
Wiring diagram for the gas dryer's electrical and gas components.
Procedure to enter and use the dryer's diagnostic test mode.
Tests for thermal cut-off, thermostats, door switch, and idler switch.
Tests for heater, thermistor, motor, gas valve, igniter, and flame detector.
Tests for outlet thermostats (auto and manual reset).
Explanation of centrifugal and belt switches for dryer safety.
Procedure to check AC electrical supply and connections.
Procedure to test the thermistor resistance and check for errors.
Procedure to test the semiconductor sensor resistance.
Procedure to test the motor resistance and check operation.
Procedure to test the moisture sensor's resistance and voltage.
Procedure to test the door switch resistance in open and closed states.
Procedure to test heater operation and safety thermostats.
Procedure to test gas valve voltage and igniter operation.
Instructions for converting the dryer from natural gas to propane.
Identifies components and wiring for steam generator troubleshooting.
Details sensor operation and voltage readings for steam generator.
Explains thermistor function and testing the pump motor.
To Next Page
