LG DLEX8100 Series - User Manual

Questions and Answers

R
Robert MannJul 27, 2025
Why is my LG Dryer not turning on?
- C
  Cynthia LewisJul 27, 2025
  Your LG dryer might not be turning on because the power cord isn't properly plugged into the outlet. Ensure that the plug is securely connected to a grounded outlet that matches the dryer's rating plate. Another possible reason is a blown house fuse, a tripped circuit breaker, or a power outage. Try resetting the circuit breaker or replacing the fuse. Do not increase the fuse capacity. If a circuit overload is the issue, have it fixed by a qualified electrician.
R
Rebecca KingJul 31, 2025
Why is my LG DLEX8100 Dryer not heating up?
- R
  Ronald EspinozaAug 1, 2025
  Your LG dryer may not be heating due to a blown house fuse, a tripped circuit breaker, or a power outage. Reset the circuit breaker or replace the fuse, but do not increase the fuse capacity. If a circuit overload is the cause, have it corrected by a qualified electrician. If you have a gas model, the gas supply or service might be turned off. Ensure that both the house gas shutoff and the dryer gas shutoff are fully open.
C
Clinton DavisAug 5, 2025
Why is there so much lint on my clothes after drying in my LG Dryer?
- J
  John HoffmanAug 5, 2025
  Excessive lint on clothes after drying in your LG dryer can occur for several reasons: * The lint filter may not be cleaned properly, so make sure you clean it before every load. * Your laundry may not be sorted correctly; some fabrics produce more lint than others. Dry lint producers separately from lint trappers. * There might be excess static in the clothes. * The dryer might be overloaded. Divide larger loads into smaller ones for drying. * Tissue or paper may have been left in pockets. Always check pockets thoroughly before washing and drying clothes.
B
Brooke RandallAug 9, 2025
What to do if my LG DLEX8100 has excess static in clothes after drying?
- A
  alexis70Aug 9, 2025
  If your LG Dryer leaves clothes with excess static, it could be due to several factors. You may not be using fabric softener, or using it incorrectly. Use a fabric softener correctly to reduce static electricity, following the manufacturer's instructions. Overdrying clothes can also cause static buildup, so adjust settings and use a shorter drying time, or use SENSOR DRY cycles. Static can also result from drying synthetics, permanent press, or synthetic blends. Try using a fabric softener with these materials.
B
Brenda CrossAug 13, 2025
What to do if there are greasy or dirty spots on clothes after using my LG DLEX8100 Dryer?
- L
  Lisa LopezAug 13, 2025
  If you notice greasy or dirty spots on clothes after drying in your LG dryer, it could be due to a few reasons. Check that you are using fabric softener correctly, following the provided instructions. Make sure you only dry clean items in your dryer, as drying clean and dirty clothes together can cause soiling. Also, stains on dried clothes might actually be stains that weren't removed during washing. Ensure clothes are being thoroughly cleaned according to the instructions for your washer and detergent.
A
Anita FullerAug 18, 2025
What does error code PS mean on my LG DLEX8100?
- O
  oscar47Aug 18, 2025
  Error code PS on your LG dryer indicates that the power cord connection is incorrect. Check the connection of the power cord to the terminal block.
T
Tim PerezAug 22, 2025
What to do if my LG Dryer display shows error code tE1 or tE2?
- K
  Kenneth HendersonAug 22, 2025
  If your LG dryer displays error code tE1 or tE2, it means the thermistor is malfunctioning. Turn off the dryer and call for service.