LG DLEY1201 - How to Use

.34 HOWTO USE
Special funcfions
The DRY LEVEL button also activate special function, including
CHILD LOCK.
* CHILD LOCK
Use this option to prevent unwanted use of the dryer or to keep
cycle settings from being changed while the dryer is operating.
Press and hold the DRY LEVEL button for 3 seconds to activate or
deactivate the CHILD LOCK function.
The CHILD LOCK icon will be shown in the display, and all controls
are disabled except the POWER button.
@ NOTE
Once set, CHILD LOCK remains active until it is manually /
deactivated. CHILD LOCK must be turned off to run another
cycle.To deactivate CHILD LOCK, press and hold the DRY LEVEL i
Cusfom program
If you have a special combination of settings that you use
frequently, you can save these settings as a CUSTOM PROGRAM.
To Save a Custom Program:
1.Turn on the dryer and press the CYCLES button to select the
desired cycle.
2. Use the cycle setting buttons to adjust the settings for that
cycle.
3. Press the cycle option button(s) for the option you would like to
add.
4. Press and hold the CUSTOM PROGRAM button for 3 seconds.
......@ NOTE
You may save only one custom program at a time. Pressing
and holding the CUSTOM PROGRAM button will overwrite any
previously saved custom program.
Sfeam funcfions
LG's new steam technology allows you to inject fabrics with a
swirling jet of hot steam to refresh clothes, reduce static, and
make ironing easier.
Simply select the Steam FreshTM cycle, or you can add a steam
option to selected cycles.
Using the STEAM FRESH TM cycle
STEAM FRESHTM uses the power of steam alone to quickly reduce
wrinkles and odor in fabrics. It brings new life to wrinkled clothes
that have been stored for an extended time and makes heavily
wrinkled clothes easier to iron. STEAM FRESHTM can also be used
to help reduce odors in fabrics.
Using the WRINKLE FREE cycle
Use to remove wrinkles, including from loads left in the dryer too
long.This is helpful in preventing wrinkles when you are unable
to remove items from the dryer immediately.
@ NOTE ,,,
• If you will be on vacation or not using your dryer for an
extended period of time, you should turn off the water supply /
to the dryer.This helps to avoid unintended flooding (due to /
To Recall a Custom Program:
1.Turn on the dryer.
2. Press the CUSTOM PROGRAM button.
3. Press the START/PAUSE button to start the cycle.