ENGLISH
23
MAKING CONNECTIONS
Connecting to a PC
Your TV supports the Plug & Play* feature and has the built-in speakers with Infinite Surround that
reproduces sound clearly with rich bass.
* Plug & Play: This is the function that allows a PC to use the TV without installing a driver.
It is recommended to use the TV with the HDMI connection for the best image quality.
If you want to use an optional external speaker instead of the built-in speaker, set the TV speaker
feature to off .
If you do not use an optional external speaker, connect the PC to the TV with the optional audio
cable.
If you turn the TV on when the set becomes cold, the screen may flicker. This is normal.
Use a shielded signal interface cable, such as D-sub 15 pin signal cable and DVI to HDMI cable,
with a ferrite core to maintain standard compliance for the product.
Some red, green, or blue spots may appear on the screen. This is normal.
Connect the signal input cable and tighten it by turning the screws clockwise.
Do not press the screen with your finger for a long time as this may result in
temporary distortion on the screen.
Avoid displaying a fixed image on the screen for a long period of time to
prevent image burn. Use a screensaver if possible.
The OSD (On Screen Display) is displayed on the screen as shown below.
»
When turning the product on in HDMI input.
»
When switching to HDMI input.
»
When connecting an HDMI cable with no signal.
If you select "Yes" the size and image quality are optimised for your PC.
If you select "No" the size and image quality are optimised for the AV device (DVD player, set-top
box, gaming device).
If you select "Do not show message again" this message does not appear until the TV is reset. You
can change the set value in Input Blue button Input Label.
The values set for HDMI1/HDMI2 are saved independently.
NOTE
NOTE
Is the input connected to your PC?
Do not show message again.
Yes No
To Next Page
Loading...
