To Next Page

To Previous Page

Checking connection status with the LED colour

You can check the connection status with the LED on the front of the wireless receiver.

LED Colour Status

Blinking green Connecting In progress

Green Connected successfully

Red Bad connection, or the receiver is in standby

Off Power cable not connected

Manual connection

If you see a red LED on the front of the wireless receiver, it means that the sound bar is not connected to the

receiver. If this is the case, connect them in the following order.

a Press the Power

button on the sound bar to turn it off.

b Press the PAIRING button on the back of the wireless receiver. Check if the LED on the front of the wireless

receiver is blinking green.

c Press the Power button on the sound bar to turn it on.

d When the connection is established, you will see the LED light on the front of the wireless receiver light up in

green.

Note

• Keep the rear speakers at least 30 cm away from the TV or monitor.

• To prevent wireless interference, maintain a distance of at least 1 m between the sound bar

or the wireless receiver and any peripheral devices that generate strong electromagnetic

waves (ex. wireless routers, microwave ovens, etc.).

Other manuals for LG DSP8YA

Questions and Answers:

Need help?

Do you have a question about the LG DSP8YA and is the answer not in the manual?

General

Display type	LCD
Product color	Black
Virtual assistant	Amazon Alexa & Google Assistant
Auto volume leveler	Yes
Audio formats supported	AAC, AAC+, FLAC, LPCM, MP3, OGG, WAV
High Dynamic Range (HDR) technology	High Dynamic Range 10 (HDR10)
Woofer diameter	64 mm
Tweeter diameter	20 mm
Tweeter impedance	4 Ω
Soundbar speaker RMS power	45 W
Woofer diameter (imperial)	2.5 \
Audio decoders	DTS:X, Dolby Atmos
RMS rated power	440 W
Audio output channels	3.1.2 channels
Top speaker RMS power	100 W
Front speakers RMS power	80 W
Audio sample rate (24bit)	96 kHz
Subwoofer connectivity	Wireless
Quantity per intermodal container (20ft)	240 pc(s)
Quantity per intermodal container (40ft)	480 pc(s)
Quantity per intermodal container (40ft, HC)	640 pc(s)
HDMI in	1
HDCP version	2.2
Bluetooth codec	SBC, AAC
Wi-Fi frequency	5 GHz
Bluetooth version	5.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Number of products included	2 pc(s)
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Subwoofer power consumption	38 W
Package type	Box
Soundbar dimensions (WxHxD)	1060 x 57 x 119 mm

Weight and Dimensions