To Next Page

To Previous Page

Connecting with an HDMI Cable

You can transmit TV audio to the product by connecting the TV to the product with an HDMI cable. Add a variety

of3Deffectstotheoriginalaudiotolltheroomwithadeep,richsound.

Watching TV after connecting with an HDMI cable

a Using the HDMI cable, connect the HDMI OUT (TV eARC/ARC) terminal on the back of the product to the

HDMI IN (ARC) terminal on the TV as shown in the picture.

b Press the Function button repeatedly until “OPT/HDMI ARC” appears on the status display.

c Press the Settings button on the TV remote control to enter the [Speaker] menu and set the output speaker

to [HDMI ARC]. Settings and menu items may vary depending on the TV manufacturer.

d When the TV is properly connected to the product, “ARC” or “E-ARC” will appear on the status display.

Note

• E-ARC supports high-quality audio such as DTS-HD Master Audio™, DTS:X®, Dolby TrueHD,

and Dolby Atmos®.

• If you wish to use Dolby Atmos® or DTS:X®, the connected device and its content should

support Dolby Atmos® or DTS:X®.

• Ensure that your TV supports the eARC function before you turn on eARC from the

Settings menu. For more information on how to use this function, please refer to your TV’s

user manual. Settings may vary depending on the TV.

• UseacertiedcablewiththeHDMIlogo.

Other manuals for LG DSP8YA

Questions and Answers:

Need help?

Do you have a question about the LG DSP8YA and is the answer not in the manual?

General

Display type	LCD
Product color	Black
Virtual assistant	Amazon Alexa & Google Assistant
Auto volume leveler	Yes
Audio formats supported	AAC, AAC+, FLAC, LPCM, MP3, OGG, WAV
High Dynamic Range (HDR) technology	High Dynamic Range 10 (HDR10)
Woofer diameter	64 mm
Tweeter diameter	20 mm
Tweeter impedance	4 Ω
Soundbar speaker RMS power	45 W
Woofer diameter (imperial)	2.5 \
Audio decoders	DTS:X, Dolby Atmos
RMS rated power	440 W
Audio output channels	3.1.2 channels
Top speaker RMS power	100 W
Front speakers RMS power	80 W
Audio sample rate (24bit)	96 kHz
Subwoofer connectivity	Wireless
Quantity per intermodal container (20ft)	240 pc(s)
Quantity per intermodal container (40ft)	480 pc(s)
Quantity per intermodal container (40ft, HC)	640 pc(s)
HDMI in	1
HDCP version	2.2
Bluetooth codec	SBC, AAC
Wi-Fi frequency	5 GHz
Bluetooth version	5.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Number of products included	2 pc(s)
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Subwoofer power consumption	38 W
Package type	Box
Soundbar dimensions (WxHxD)	1060 x 57 x 119 mm

Weight and Dimensions