What to do if the audio function is not working on my LG Monitor?
If the audio on your LG monitor isn't working, check that the volume isn't set to '0' and that the sound isn't muted. Ensure the HDMI cable and headphone cable are properly installed. Also, verify the sound format is correct and not a compressed format.
How to resolve 'Unrecognized monitor, Plug&Play (VESA DDC) monitor found' message on my LG Monitor?
To resolve the 'Unrecognized monitor' message on your LG monitor, ensure you install the display driver from the display driver CD that comes with your display. Also, make sure to check if the video card supports Plug&Play function.
Why is the screen color mono or abnormal on my LG E1951T?
If the screen color on your LG monitor is mono or abnormal, first check if the signal cable is properly connected and use a screwdriver to fasten it if necessary. Also, make sure the video card is properly inserted in the slot. Finally, set the color setting higher than 24 bits (true color) at Control Panel ? Settings.
How to unlock OSD on LG Monitor?
To unlock the OSD controls on your LG Monitor, push the left first button for several seconds until the message “OSD UNLOCKED” appears.
How to fix the mono or abnormal screen color on my LG Monitor?
If your LG Monitor's screen color is mono or abnormal, check if the signal cable is properly connected, tightening it with a screwdriver if necessary. Also, ensure the video card is properly inserted in its slot. Lastly, set the color setting higher than 24 bits (true color) in the Control Panel settings.
What to do if the display image on my LG E1951T is incorrect?
If the display image on your LG Monitor is incorrect, with issues like incorrect position, vertical bars, stripes, or horizontal noise, press the AUTO button to automatically adjust the display image to the ideal setting. For horizontal noise or unclear characters, also check the display settings in the Control Panel and adjust to the recommended resolution, ensuring the color setting is higher than 24 bits (true color).
How to fix screen blinking on LG E1951T Monitor?
To fix a blinking screen on your LG Monitor, check if the screen is set to interlace mode and change it to the recommended resolution if it is.
What to do if no image appears on my LG E1951T?
If no image appears on your LG Monitor, here are a few things you can try: * Ensure the power cord is properly connected to the power outlet. * Press the Power button. * If the display is in power saving mode, move the mouse or press any key on the keyboard. * Try turning on the PC. * Check the 'Specifications' section of this manual and configure your display again. * Check the signal cable and try again.
How to fix incorrect display image on my LG E1951T?
To correct the display image on your LG monitor, press the AUTO button to automatically adjust the image to the ideal setting. Alternatively, go to Control Panel ? Display ? Settings and adjust the display to the recommended resolution. You can also adjust the display image to the ideal setting there. Ensure the color setting is higher than 24 bits (true color).
Why does my LG Monitor have no image?
If your LG Monitor displays no image, ensure the power cord is properly connected to the outlet and that the power button is pressed. If in power saving mode, move the mouse or press a key. Also, verify that the signal cable is connected correctly.
General| Resolution | 1366 x 768 |
|---|---|
| Aspect Ratio | 16:9 |
| Panel Type | TN |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Connectivity | VGA, DVI-D |
| Screen Size | 18.5 inches |
| Viewing Angle | 90° (Horizontal), 65° (Vertical) |
To Next Page
