LG E2350V User Manual

7
Connecting the Display
4. If you want to use the stand base,pull the stand body down.
(Once you pull the stand body down, please keep pressing the button.If you don’t
press the button, it will damage the product.)
5. Use a coin on the back of the stand base and turn the screw clockwise to tighten.
6. Once assembled take the monitor up carefully and face the front side.
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.

LG E2350V Specifications

General

Pixel pitch	0.265 x 0.265 mm
Aspect ratio	16:9
Display diagonal	23 \
Vertical scan range	56 - 75 Hz
Horizontal scan range	30 - 83 kHz
Contrast ratio (dynamic)	5000000:1
Contrast ratio (typical)	1000:1
Viewing angle, horizontal	170 °
Display brightness (typical)	250 cd/m²
HDCP	Yes
DVI-I ports quantity	0
Product color	Black
Market positioning	-
Power requirements	90 - 264 Vac, 47 - 63 Hz
Power consumption (standby)	1 W
Power consumption (typical)	28 W
LED indicators	Stand-by

Weight and Dimensions

Bezel width (side)	3300 mm
Depth (with stand)	198 mm
Width (with stand)	559.8 mm
Height (with stand)	428.1 mm
Depth (without stand)	39.9 mm
Width (without stand)	529.8 mm
Height (without stand)	354 mm
Weight (without stand)	2860 g