LG EV96 Series - Speaker Output Setup; Network Setup; Wired Network Connection

11
ENGLISH
Speaker output setup
VOLUME
CONTROL
STEREO
(8 )
+
-
UP
DOWN
Control port for Speaker out
RIGHT
LEFT
GND
GND
• Use only with the 3 Pole 3.5 mm Stereo Jack.
• Do not connect your headphones or earphones to the port for
connecting an external speaker.
Method of volume control port
• Cable Spec.
GND / UP / DOWN
Each Up / Down pin
is pulled to 3.3 V with
CPU GPIO.
CPU detects transition
from 3.3 V to GND level
for volume control.
Network setup
Wired network connection
This TV can be connected to a Pro:Centric server via the LAN port. After
making the physical connection, the TV needs to be set up for network
communication.
Connect the LAN port of the Modem or Router from Pro:Centric server
to the LAN port on the TV.
2
1
Broadband Modem
Pro:Centric Server
Broadband Modem
Pro:Centric Server
Router
Broadband Modem
1
Connect the LAN port of the Modem or Router to the LAN port
on the TV.
2
Connect the LAN port of the PC to the AUX LAN port on the TV.
• Do not connect a modular phone cable to the LAN port.
• Since there are various connection methods, please
follow the specifications of your telecommunication
carrier or internet service provider.