LG F1069FD2 - Special Price Ending Time Setup

43
PROGRAMMING MODE - SETUP MODE
NOTE
• (regular priced dryer cycle time) is not available in washer.
• (special priced dryer cycle time) is not available in washer.
NOTE
• When setting up a special price period, the ending time must be later than the beginning time.
Entering set up mode.
You will see LqC1
Button Display
Press the
WHITES
button.
Press the
COLORS
or the
DELICATES
button until appears in the display.
Press the
START
button.
Press the
COLORS
or the
DELICATES
button until appears in the display.
Press the
START
button.
Display previous Special Price ending time.
Press
COLORS(+)
or
DELICATES(-)
button to select time between
1
and
24
.
Press the
START
button.
The machine sets up the special price ending time, then advances to the next
process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
14. Special price ending time setup