LG F1422TD0 - Page 19

19
ow to use washer
H
Spin
[F1422TD(0~9)] [F1222TD(0~9)] [F1022TD(0~9)]
• Rinse Hold is selected by pressing the spin
button repeatedly this function leaves
clothes in the machine; suspended in the
water after a rinse without entering into spin.
• To proceed through to a drain or spin, once
the rinse hold function is completed using to
Program dial and Spin button to the
required program.(Spin)
The required lamp will light up for
identification.
• If No spin is selected, the washer stops after
draining water.
F1422TD(0~9)
- Cotton, Cotton Quick, Rinse+Spin, Quick 30,
Bio Care, Bulky
Rinse Hold - No Spin - 400 - 800 - 1400
- Delicate, Duvet, Baby Care, Boiling Care,
Synthetic, Hand Wash/Wool
Rinse Hold - No Spin - 400 - 800
- Spin
No Spin - 400 - 800 - 1400
• Spin Speed is available according to
the program as follows.
F1222TD(0~9)
- Cotton, Cotton Quick, Rinse+Spin, Quick 30,
Bio Care, Bulky
Rinse Hold - No Spin - 400 - 800 - 1200
- Delicate, Duvet, Baby Care, Boiling Care,
Synthetic, Hand Wash/Wool
Rinse Hold - No Spin - 400 - 800
- Spin
No Spin - 400 - 800 - 1200
F1022TD(0~9)
- Cotton, Cotton Quick, Rinse+Spin, Quick 30,
Bio Care, Bulky
Rinse Hold - No Spin - 400 - 800 - 1000
- Delicate, Duvet, Baby Care, Boiling Care,
Synthetic, Hand Wash/Wool
Rinse Hold - No Spin - 400 - 800
- Spin
No Spin - 400 - 800 - 1000
• After selecting the spin course, the spin
speed can be chosen by pressing the spin
button.
1. Spin selection 2. No spin
3. Rinse Hold