22
The Beep on/off function can be set only during the washing cycle.
1. Press
the
Power button.
2. Press the Start/Pause button.
3. Press and hold the Option2 and Rinse button
simultaneously for three seconds
to set Beep on/off function.
Once the Beep on/off function is set, the setting
is memorized even after the power is turned off.
ow to use washer
H
Locking the control panel
1. Press
the
Temp. and Rinse button
simultaneously for 3 seconds.
2. A beeper will sound, and ' ' will appear
momentarily on the LED Display.
When the child lock is set, all buttons are
locked except for the Power button.
Select this function to lock the buttons on the control assembly to prevent tampering.
"Child Lock" can be set only during the washing cycle.
Unlocking the control panel
1. Press
the
Temp. and Rinse button
simultaneously for 3 seconds.
2. A beeper will sound and the remaining time
for the current programme will reappear on
the LED Display.
Turning off the power will not reset the
child lock function. you must deactivate
child lock before you can access any
other functions.
If you want to turn off Beeper simply
repeat this process
■ Child Lock
■ Beep On / Off
To Next Page
Loading...
Need help?
General
