LG F2721STWV User Manual

12
Using Anti-Slip Sheets (Optional)
If you install the washing machine on a slippery surface,
it may move because of excessive vibration. Incorrect
leveling may cause malfunction through noise and
vibration. If this occurs, install the anti-slip sheets under
the leveling feet and adjust the level.
1
Cleantheoortoattachtheanti-slipsheets.
•
Use a dry rag to remove and clean foreign
objects and moisture. If moisture remains, the
anti-slip sheets may slip.
2
Adjust the level after placing the washing machine
in the installation area.
3
Place the adhesive side of the anti-slip sheet on
theoor.
•
It is most effective to install the anti-slip sheets
underthefrontlegs.Ifitisdifculttoplacethe
pads under the front legs, place them under the
back legs.
This side up
Adhesive side
4
Ensure the washing machine is level.
•
Push or rock the top edges of the washing
machine gently to make sure that the washing
machine does not rock. If the washing machine
rocks, level the washing machine again.
Wooden Floors (Suspended
Floors)
•
Woodenoorsareparticularlysusceptibletovibration.
•
To prevent vibration we recommend you place rubber
cups at least 15 mm thick of the each foot of the
washingmachine,securedtoatleasttwooorbeams
with screws.
Rubber Cup
•
If possible install the washing machine in one of the
cornersoftheroom,wheretheoorismorestable.
•
Fit the rubber cups to reduce vibration.
•
You can obtain rubber cups (p/no.4620ER4002B) from
the LG Service Centre.
NOTE
•
Proper placement and leveling of the washing
machine will ensure long, regular, and reliable
operation.
•
The washing machine must be 100% horizontal
andstandrmlyinposition.
•
It must not ‘Seesaw’ across corners under the
load.
•
The installation surface must be clean, free from
oorwaxandotherlubricantcoatings.
•
Do not let the feet of the washing machine get
wet. Failure to do so may cause vibration or noise.

LG F2721STWV Specifications

General

Door hinge	Left
Motor type	Beltless
Control type	Rotary, Touch
Loading type	Front-load
Product color	Silver
Built-in display	Yes
Appliance placement	Freestanding
Connected load	2200 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Drum capacity	21 kg
Spin-drying class	-
Maximum spin speed	1000 RPM
Noise level (spin)	51 dB
Noise level (wash)	48 dB
Load balancing system	No
Number of rinse selections	5

Weight and Dimensions

Depth	835 mm
Width	700 mm
Height	990 mm
Weight	100000 g