To Next PageTo Next PageHow to fix 1E INLET ERROR on my LG Washer/Dryer?
To fix the 1E INLET ERROR on your LG Washer/Dryer, check if the water supply is adequate by testing another tap in the house. Ensure the water supply tap is completely open and that the water supply hoses are not kinked. Also, inspect and clean the filter of the inlet hose.
What to do if my LG F2V5PGP Washer/Dryer displays an OE WATER OUTLET ERROR?
The OE WATER OUTLET ERROR on your LG Washer/Dryer typically means there's a problem with the drain. This could be because the drain hose is kinked or clogged, so you should clean and straighten the drain hose. Alternatively, the drain filter might be clogged. Check and clean the drain filter to resolve this issue.
How to fix a 1E INLET ERROR on my LG Washer/Dryer?
The 1E INLET ERROR on your LG Washer/Dryer indicates an issue with the water supply. First, check another tap in the house to ensure the water supply is adequate. Make sure the water supply tap is completely open. Also, inspect the water supply hoses for any kinks and straighten them or reinstall the water inlet hose. Finally, the filter of the supply hoses might be clogged, so check and clean the filter of the inlet hose.
What to do if my LG F2V5PGP shows a UE UNBALANCE ERROR?
If you see the UE UNBALANCE ERROR on your LG Washer/Dryer, it could be due to several reasons. The laundry may be too wet at the end of the cycle. To fix this, rearrange the laundry to allow proper spinning. Close the door and press the Start/Pause button. It may take a few moments before the appliance begins to spin, and the door must be locked before spin can be achieved. Alternatively, the load might be too small. In this case, add 1 or 2 similar items or smaller articles of laundry to help balance the load. Close the door and press the Start/Pause button again.
What to do if my LG F2V5PGP Washer/Dryer and smartphone are not connected to Wi-Fi?
If your LG Washer/Dryer and smartphone are not connecting to Wi-Fi, find the Wi-Fi network connected to your smartphone and remove it, then register your appliance on LG ThinQ. Turn off the Mobile data of your smartphone and register the appliance using the Wi-Fi network. The wireless network name (SSID) should be a combination of English letters and numbers (do not use special characters). Only a 2.4 GHz router frequency is supported, so set the wireless router to 2.4 GHz. Move the location of the router so that it is closer to the appliance.
What to do if my LG Washer/Dryer does not drain water?
If your LG Washer/Dryer does not drain water, ensure that the drain hose is not kinked and that the drain hose is not higher than 1.2 m above the bottom of the appliance.
Why won't my LG F2V5PGP door open?
The door of your LG Washer/Dryer may not open for safety reasons once the appliance starts. Check if the H icon is illuminated. You can safely open the door after the H icon turns off.
Why is the drying time too long on my LG F2V5PGP?
If the drying time on your LG Washer/Dryer is too long, it may be due to a low ambient temperature. Ensure the temperature is within an allowable range.
How do I resolve 'Drying performance is too low or bad' on my LG Washer/Dryer?
To improve drying performance on your LG Washer/Dryer, ensure the water supply tap is open and the drain filter is not clogged. Check the load capacity for the selected cycle and add a time dry cycle if necessary. Select the highest spin speed allowed for the wash cycle.
General| Display Type | LED |
|---|---|
| Wi-Fi Connectivity | Yes |
| Steam Function | Yes |
| Inverter Direct Drive | Yes |
| Type | Washer/Dryer Combo |
| Color | White |
| Wash Programs | Cotton, Delicate, Easy Care, Mixed Fabric, Allergy Care, Baby Care, Quick Wash, Wool |
| Smart Connectivity | Yes |
