Why is detergent not dispensing properly in my LG FV1409D4V?
If detergent isn't dispensing correctly in your LG Washer/Dryer, you might be using too much detergent. Follow the guidelines provided by the detergent manufacturer.
How to solve OE water outlet error on LG FV1409D4V Washer/Dryer?
If your LG Washer/Dryer displays an OE WATER OUTLET ERROR, it means there's a problem with the water draining. The drain hose might be kinked or clogged, so clean and straighten it. Also, the drain filter could be clogged, so check and clean it as well.
Why my LG Washer/Dryer does not drain water?
If your LG Washer/Dryer isn't draining water, first ensure that the drain hose is not kinked. Also, make sure that the drain hose is not higher than 1.2 m above the bottom of the appliance.
What does PE PRESSURE SENSOR ERROR mean on LG Washer/Dryer?
In the event of a PE PRESSURE SENSOR ERROR on your LG Washer/Dryer, close the water tap and unplug the power plug. After that, call for service.
Why are my clothes wrinkling in LG Washer/Dryer?
If your clothes are wrinkling after using your LG Washer/Dryer, it could be because the appliance isn't unloaded promptly. Always remove items as soon as the cycle is complete. Also, the appliance might be overloaded. The appliance can be fully loaded, but the drum should not be tightly packed with items.
What does FF frozen failure mean on LG FV1409D4V Washer/Dryer?
If your LG Washer/Dryer shows an FF FROZEN FAILURE, it means the supply/drain hose or drain pump is frozen. Supply warm water into the drum to unfreeze the drain hose and the drain pump. Cover the supply hose with a wet and warm towel.
What to do if LG Washer/Dryer has a dry problem?
To address a dry problem with your LG Washer/Dryer, check the water supply tap and ensure it's properly supplying water. Avoid overloading the appliance and confirm that it's draining correctly to extract sufficient water from the load. If the laundry load is too small to tumble properly, add a few towels. Also, turn off the water supply tap.
Why does my LG Washer/Dryer show 1E INLET ERROR?
The 1E INLET ERROR on your LG Washer/Dryer indicates an issue with the water supply. This could be due to several reasons: the water supply might be inadequate, the water supply tap isn't fully open, the water supply hoses are kinked, or the filters of the supply hoses are clogged. To resolve this, first check another tap in the house to ensure adequate water supply. Then, fully open the water supply tap. Inspect the water supply hoses for any kinks and straighten them or reinstall the hose. Finally, turn off the taps, remove the hose connections to the washing machine, and check and clean the inlet valve filter.
How to fix 1E INLET ERROR on my LG FV1409D4V?
The 1E INLET ERROR on your LG Washer/Dryer indicates a water supply issue. First, check another tap in the house to ensure the water supply is adequate. Next, make sure the water supply tap for the washer/dryer is completely open. Also, inspect the water supply hose(s) for any kinks and straighten them, or reinstall the water inlet hose. Finally, check and clean the filter of the inlet hose, as it may be clogged.
What to do if my LG FV1409D4V Washer/Dryer shows PF POWER FAILURE?
If your LG Washer/Dryer shows a PF POWER FAILURE, restart the cycle.
General| Brand | LG |
|---|---|
| Model | FV1409D4V |
| Category | Washer/Dryer |
| Language | English |
To Next Page
