What to do if my LG FV1209D4M displays an OE WATER OUTLET ERROR?
The OE WATER OUTLET ERROR on your LG Washer/Dryer typically means there's a problem with the drain. This could be because the drain hose is kinked or clogged, so you should clean and straighten the drain hose. Alternatively, the drain filter might be clogged. Check and clean the drain filter to resolve this issue.
What to do if my LG FV1209D4M shows a UE UNBALANCE ERROR?
If you see the UE UNBALANCE ERROR on your LG Washer/Dryer, it could be due to several reasons. The laundry may be too wet at the end of the cycle. To fix this, rearrange the laundry to allow proper spinning. Close the door and press the Start/Pause button. It may take a few moments before the appliance begins to spin, and the door must be locked before spin can be achieved. Alternatively, the load might be too small. In this case, add 1 or 2 similar items or smaller articles of laundry to help balance the load. Close the door and press the Start/Pause button again.
How to fix a 1E INLET ERROR on my LG FV1209D4M?
The 1E INLET ERROR on your LG Washer/Dryer indicates an issue with the water supply. First, check another tap in the house to ensure the water supply is adequate. Make sure the water supply tap is completely open. Also, inspect the water supply hoses for any kinks and straighten them or reinstall the water inlet hose. Finally, the filter of the supply hoses might be clogged, so check and clean the filter of the inlet hose.
General| Washing Capacity | 9 kg |
|---|---|
| Drying Capacity | 6 kg |
| Spin Speed | 1200 rpm |
| Weight | 66 kg |
| Color | White |
| Noise Level Spinning | 72 dB |
| Steam Function | Yes |
| Inverter Direct Drive | Yes |
| Type | Washer Dryer Combo |
| Dimensions (H x W x D) | 85 cm x 60 cm x 60 cm |
To Next Page
